FEATURES

Adjustable Load Ratio for Custom Intensity The Mustang PRO's innovative adjustable load-ratio system offers four distinct resistance settings, ranging from lighter to heavier (0.8×, 1.05×, 1.15×, 1.3×). Simply pull the pin to instantly dial in the challenge, with all four settings switching smoothly in seconds while you remain seated and without unloading plates. This gives lifters of all levels the ability to fine-tune every set, push past plateaus, make steady progress, and easily reduce resistance for true within-set failure training.

All-in-One Quad & Hamstring Station Train both leg extensions and lying leg curls on a single, space-efficient machine. A simple pull-pin lets you switch between quad and hamstring modes in seconds, making it easy to run supersets, save space, and get more done in less time, all without changing equipment. Every movement also supports single-leg training, so you can isolate each side and help correct muscle imbalances.

Premium Comfort for Every Set Extra-wide 2.36 inches thick seat and back pads, paired with large 4.80 inches diameter foam rollers, distribute pressure evenly so heavy sets stay comfortable and secure. Upgraded rubber grips, smooth cable travel, and band-peg compatibility complete the premium training experience.

400 lb Capacity & Rock-Solid X-Frame Stability Built from heavy-duty 1.97 × 2.76 inches (50×70 mm / 14-gauge) steel tubing, the reinforced X-frame delivers exceptional rigidity and balance. The machine supports up to 400 lb of loaded weight and users up to 550 lb, providing a planted, confidence-inspiring feel that rivals commercial gym equipment.

Butter-Smooth Cable Motion High-quality aluminum pulleys combined with multi-bearing and linear-bearing components create an exceptionally smooth resistance path. The result is fluid, controlled motion with minimal friction — helping protect your joints, improve control, and maintain consistent tension throughout every rep, without the dead spots and lockout drop-off that plague lever-only machines.

Ergonomic Adjustments for Any Body Size The synchronized seat and backrest offer multiple adjustments: the first two settings optimize seated leg extensions with slightly different quad emphasis, while the third locks in a 15° incline for lying curls. This ergonomically tuned angle keeps your pelvis neutral, minimizing lower-back stress for peak hamstring isolation.

MORE DETAILS

Quiet, Home-Friendly Motion Sealed pulleys and an optimized cable path minimize noise and vibration, making this machine ideal for garages, basements, or shared living spaces.

Wide Stable Base for Heavy Lifts The 48-inch-wide base and X-frame load-section keep all four feet planted under heavy loads — no sway, no creep, no rerack to recenter the bar. This is the kind of stability serious leg-day work demands when fatigue starts to bite at form.

Premium Powder-Coated Frame Thick-gauge steel with a durable powder-coat finish resists chips, scuffs, and rust, so your machine keeps looking new after years of sweaty workouts.

Easy Plate Compatibility A long weight horn fits 2-inch Olympic plates with room to grow. You simply slide on more weight as your legs get stronger.

Comfort-First Touch Points Rounded edges, soft vinyl upholstery, and foam-wrapped contact areas reduce pinching and pressure, so you focus on muscle burn — not joint discomfort.

Embossed Grain Pad Surface A finely embossed grain across the textured, easy-clean vinyl upholstery gives the seat and backrest a leather-like feel — grippy under sweat and crack-resistant where smooth vinyl fails over time.

CORE SPECS

Core Specs

Weight Loading Capacity	400 lb
Max User Weight	550 lb
Suggested User Height	5'1"–6'5" (1.55–1.95 m)
Adjustable Load Ratio	4 positions: 0.8x / 1.05x / 1.15x / 1.3x
Net Weight (Assembled)	150 lb (68 kg)

Uprights & Frame

Main Frame Tubing	1.97 × 2.76 in (50×70 mm) × 1.8 mm wall (14-gauge) — main; 50×50 mm × 1.5 mm wall (16-gauge) — secondary
Frame Finish	Powder-coated black
Frame Stability	X-frame load-bearing section + 48-inch-wide base
Cam Pulley	12-position aluminum + Q235 zinc; multi-bearing + linear-axis-bearing

Pads & Handles

Seat Pad	15.6 × 16.8 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over recycled bonded foam
Backrest Pad	12.4 × 24 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over EPE foam
Backrest Adjustment	3 synchronized positions (seat -18.5° / -11.2° / +15°; backrest pad 95.6° / 114.6° / 146.4°)
Handles	2 × 150 mm single-piece anti-slip rubber

Rollers

Leg Roller	4.80 in (122 mm) diameter × 19.3 in (490 mm) long
Roller Filling	High-density EVA pearl-cotton foam
Roller Cover	Textured vinyl cover

Compatibility & Mechanics

Plate Type	2-inch Olympic only
Load Bar	4-position pull-pin slide; 350 mm effective length; 75.3 mm position spacing
Storage Post	13 in (330 mm) effective length; steel + paint
Band Pegs	2 × 63 mm twist-mount Q235 + electroplated zinc

SHIPPING

Free shipping to lower 48 states. Ships in 2 boxes, usually within 2-3 business days. Tracking provided for every order.

Leg Machine

RitFit BLP01 45 Degree 3-In-1 Leg Press Hack Squat and Calf Raise Machine

RitFit BLP01 45 Degree 3-In-1 Leg Press Hack Squat and Calf Raise Machine - Pink

RitFit Pink Power Pro

RitFit Pro Strength System

RitFit Mustang PRO Leg Extension Curl Machine